Jabber at Android Htc Desire not able to register to cucm with secure connect
I having a problem using secure connect at a Htc desire.
When I am at the company wireless Jabber for htc is working as expected. but when I am using it at a not known wireless or 3G connection and using secure connect, it's not working.
I am able to get the directory search up but I am not able to get the Jabber client to register to the cucm. attached is a trace file from the jabber client where its looks like all the tftp config file is downloaded and the registration to the cucm is starting, then it looks like it reset the ip stack and the the sip registrations expired.
we have tried to register an Iphone to the same ASA but with any connect and that was successful so it's probably not the ASA configuration which is causing the problem
Anyone who maybe have successfully get a Htc desire to function through the ASA via the secure connect I would appreciate any help regarding their configuration
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...