So if i have a client with BE6K and Enhanced licening with Jabber Desktop client and a physical 8861 handset can i click on the "use my phone for calls" option and select my Cisco 8961 handset ? or would i need to use Enhanced plus? i am unsure as the Jabber client isnt acting as a full voice client as such so i want to ensure i have the correct answer.
I ideally would like a document link to back up the answer as evidence.
With No. 1 of user profiles + No 1 Connect Licensing Enhanced (9.X) (NO PLUS) can do you configure two devices voice (6941 handset + deskstop Jabber client) and by "end user GUI" select which one to keep active?
Only one device support at the same time for voice capability: 6941 handset or deskstop Jabber client.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...