Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Jabber for Android: Cannot connect to Phone Services

I'm trying to setup a Jabber for Android client IM&P is working fine, but phone services aren't. I just get the error message:

 

"Cannot connect to Phone Services server. Check your network settings."

 

Other Jabber clients (Windows, Mac, iPhone & iPad) can all connect fine from the same WiFi network and get phone services. Any suggestions as to what to look for? Are there any diagnostic logs I can view in the Android Jabber client?

 

Thanks,

 

GTG

Please rate all helpful posts.
25 REPLIES
Community Member

Hi, I have the same problem

Hi,

 

I have the same problem with an HTC one android 4.4.2

No problem on a Samsung S3 android 4.2

 

Regards,

PV

HTC One: Not Supported. Doesn

HTC One: Not Supported. Doesn't work.

Samsung Galaxy Note 3: Support, Doesn't work.

Samsung Galaxy S5: Supported, Works.

 

I can see Android is going to be a right royal PITA. It's almost going to be easier to say Android ISN'T supported...

 

GTG

Please rate all helpful posts.
Silver

Gordon,Did you find a

Gordon,

Did you find a solution? I have the same issue with CUCM/IMP 10.5 and jabber 10.5 (windows and android)

Windows works perfectly, but jabber android has the "Cannot connect to Unified Communication Manager server"

If I check the log files all seems OK, I can see jabber android finds the device, the DN, names all, but doesn't register.

 

Thanks

 

Jan

Sorry, I can't get the HTC

Sorry, I can't get the HTC One to work. There's no point in asking TAC as they'll say it's not a supported phone.

 

:(

 

GTG

Please rate all helpful posts.
Silver

I am using Samsung Galaxy 3

I am using Samsung Galaxy 3 and this is supported I believe, and previous version of jabber android worked fine.

 

Jabber is still not OK,

Cisco must put much more effort in  it :(

OK. In the Protocol Specific

OK. In the Protocol Specific Information section of the Jabber device, check that you've configured the SIP Digest User to that of the owner.

 

GTG

Please rate all helpful posts.
Silver

I tried that now, but still

I tried that now, but still my phone services are not available

 

Jan

 

Community Member

Adding the domain name as

Adding the domain name as user define BOT device can resolve the issue relative to Samsung phone, any other non-support Android phone should use mixed mode security in order to resolve the issue.

 

 

Michael

Community Member

I should tell that the cisco

I should tell that the cisco supports only a 6-7 modells of android devices that can handle a calls - other will fail to register. The main feature about htc is that they blocked some sip functionality in their software - so no luck to use them untill you change something in your phone (with root rights).

Community Member

Hi All, I'm running UC

Hi All,

 

I'm running UC applications on version 10.5, and Jabber for Android on 11.0 release on a Samsung S4.

On the Corporate WiFI, all services work well, but when I login via Expressway on a different wifi, the IM&P and Unity services are good, but no phone services. 

 

I've already set the domain on the BOT device, add digest authentication, excluded the device and add it again, but the problem still remains.

 

Please, any thoughts?

Community Member

Go to the bottom of the

Go to the bottom of the device page and add your root domain address

That worked for me. Thanks

That worked for me. Thanks

__________________________________________________
Please remember to rate useful posts clicking on the stars below.
LinkedIn Profile: do.linkedin.com/in/leosalcie
Community Member

Did you manage to get this

Did you manage to get this working on a HTC One?

I think I heard that the HTC

I think I heard that the HTC One might be supported in a later Jabber version, but I'm not sure when that will be.

 

GTG

Please rate all helpful posts.
21667
Views
30
Helpful
25
Replies
CreatePlease to create content