Jabber for iPhone with connection issues over AnyConnect
we are facing a very strange behaviour with Jabber for iPhone. Does anyone knows what could cause this behaviour? Any help is appreciated but I do belive that this might be some sort of bug. The scenario is the following:
The user must at least once register it over the WLAN first in order to work fine over the VPN (AnyConnect) later, and If the CUCM Pub server is restarted or the TCT device is changed in anyways, the user is no longer able to register it over the VPN (until he register it again over the WLAN), although he can reach fine the CUCM admin pages using the iPhone Safari browser anytime over the same AnyConnect VPN session.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...