Normally I recommend latest versions of Jabber for the different platforms in terms of application improvement but i´ve seen issues using new releases for example last year UCM 9.1.2 was the last available version so I installed Jabber 9.6.(1) on Feb 2014 but some features were not working as should so made a downgrade to 9.2(6) and averything worked like a charm.
In your case try the last 9.6(0) version of Mac Jabber if it does not suits your needs you can download the one that I´ve uploaded in this post.
Regarding you question about the difference between downloads I suppose your refer to Media Services Interface archive as this is explained in the following post:
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...