I deployed the Jabber at the environment. The Jabber on the Windows is perfect working, including LDAP Directory, Photo, Associated desktop & softphone, and click to call.
But some features would not work on the Jabber on the MAC, that have not the LDAP Directory and LDAP Directory, which cannot associate the LDAP Directory. Should I turn the setting on the CUCM for the LDAP Directory? Why the AD Photo is not working on the MAC? The XML should deployed as below, but that is not work on MAC, only work on the Windows:
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...