Jabber for Windows 10.5 use alternate field for contact telephone number
I am researching the best way to have Jabber clients use the correct phone number for contacts. Currently, the customer is using the ipphone field to store the desired local extension for the contact. However, the default is to use the telephone number field in AD.
Is there a way to configure this on the IM&P server, CUCM UC profile, or is it best to use the jabber-config.xml file to override this setting, while allowing all other settings to be populated via the service profiles in CUCM?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...