So we ordered a new Expressway C & E along with a Jabber Guest "Right to Use". We did not purchase any RMS licenses though because we have CUWP licensing. How do I get RMS licenses from our CUWP licenses, as it shows they are included with CUWP.
Thank you, Justin Ferello Technical Support Specialist, ScanSource KBZ
I am not intimately familiar with ordering through CUWP, but I do know that you are entitled to 10 RMS licenses per 50 users. I believe you add them through the PUT, with the part number: LIC-EXP-10RMS-CPW=
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...