I have installed Jabber guest and I can make a call using a link, but I have one way voice and video. The outside voice and video can be heard on a inside video phone (9951). But all voice and video from the 9951 don't reach the jabber guest.
All the signaling is OK, when jabber guest or the 9951 ends the call it disconnects correctly on both devices, so the signalling seems to be OK
I am sure it has to do with the ASA, but what exactly is needed on the ASA? I have configured the expressways with a traversal zone similar to expressway MRA. What else is needed? I there an example for the ASA configuration needed whehn you have Jabber guest?
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.