Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

Jabber integration with UCCX v9

Hello all!

I was wondering if it is possible to integrates Jabber with UCCX v9, specifically (9.0.2.11001-24), at work we are using Jabber like an extra phone, and it works really great! But I would like to know if we can use it for UCCX instead of using hardphone and extension mobility.

Thank you!

2 ACCEPTED SOLUTIONS

Accepted Solutions

Jabber integration with UCCX v9

Hi Ronaldo,

Yes supported

You can use jabber for windows as an agent device but only in softphone mode

Check below link

http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf

Regards

Haitham

Jabber integration with UCCX v9

Not the one marked red

softphone is to use my computer for calls

Thanks

Haitham

7 REPLIES

Jabber integration with UCCX v9

Hi Ronaldo,

Yes supported

You can use jabber for windows as an agent device but only in softphone mode

Check below link

http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf

Regards

Haitham

Re: Jabber integration with UCCX v9

Thanks for the reply

Just to be sure, the "softphone mode" is using the option I marked, right?

Jabber integration with UCCX v9

Not the one marked red

softphone is to use my computer for calls

Thanks

Haitham

Jabber integration with UCCX v9

mmmmmm I dont get it, what is the difference between softphone mode and the regular one?

The chat option is disabled then?

Jabber integration with UCCX v9

I don't think it is related to chat

I think that when you are using softphone mode, then when you make a call, your ip phone won't reflect this except showing red light on your line button as your line is busy. and when call is answered, you will speak from your pc mic

But when using deskphone mode, and when you make a call, you will see your ip phone is calling the dialed party, when answered , you can pickup the handset to speak

you can say the softphone mode is like using ip communicator

Regards

Haitham

Jabber integration with UCCX v9

ip communicator also is supported as an agent phone

Jabber integration with UCCX v9

ooooooohhhhhhhh got it!!

Thanks for all the help Hythamhadad!!

In fact, I hate IP communicator and we are trying to move out of it.

Thanks again.

452
Views
0
Helpful
7
Replies
CreatePlease to create content