I'm using the Jabber at the inside and the outside.
At the outside, I generate the issued certs from public CA to the Expressway-C and Expressway-E. That still will prompt up the cert error when the user login the VPN-less Jabber at the outside. But the cert would be prompted the cert error one time, that mean if the user is the 1st time login and new install, so that would prompt cert one time, but it will not be happened as the second login.
As the inside, that is so uncomfortable. The internal Jabber would prompt many many certs' error. How many CUCM, IMP, UC, that would prompt the how many certs error. I checked some guide said I can change the related certs to sign by the public CA as below:
Cisco Unified Communications Manager IM and Presence
Cisco Unified Communications Manager
Cisco Unity Connection
My CUCM, IMP, UC are self sign certs only. I can sign that out by public CA, but I'm afraid that will affect my production UC environment, including, internal IP-Phone, VPN IP-Phone, Jabber for Voice with ASA VPN (One click Anyconnect login), Cisco VCS ... Any ideas?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...