Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Jabber thru Firewall to IM&P

All,

I cannot find any documentation on how to configure a firewall to allow remote users of Jabber for Windows to connect back to our IM&P server without using AnyConnect.         

Thank you,

Justin Ferello
Technical Support Specialist
KBZ, a Cisco Authorized Distributor
http://www.kbz.com
e/v: justin.ferello@kbz.com       

Thank you, Justin Ferello Technical Support Specialist KBZ, a Cisco Authorized Distributor http://www.kbz.com e/v: justin.ferello@kbz.com
5 REPLIES
Cisco Employee

Jabber thru Firewall to IM&P

I'd suggest you to look into Collaboration Edge, guess that would be perfect for you.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Jabber thru Firewall to IM&P

Jaime,

Yes, we are very aware of CE, but that is a month or two off.  Which is fine, we can wait, just need a firm yes or no for current technology to tell management to wait.

Thank you,

Justin Ferello
Technical Support Specialist
KBZ, a Cisco Authorized Distributor
http://www.kbz.com
e/v: justin.ferello@kbz.com

Thank you, Justin Ferello Technical Support Specialist KBZ, a Cisco Authorized Distributor http://www.kbz.com e/v: justin.ferello@kbz.com
Cisco Employee

Jabber thru Firewall to IM&P

You mean what will be required for CE??

To cross-check against what you currently have??

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Jabber thru Firewall to IM&P

Jaime,

No, here is the deal.

Management comes to me today and says, we need Jabber deployed to outside staff without AnyConnect.

First, I need to know is it possible with just CUCM, IM&P & a firewall or not?

If yes, then what ports need to be opened on the firewall and are there any special configurations on IM&P or CUCM that need to be done?  Assume we are using Jabber within the network fine right now.

If no, then that is fine, as long as I get an official no from Cisco

Thank you,

Justin Ferello
Technical Support Specialist
KBZ, a Cisco Authorized Distributor
http://www.kbz.com
e/v: justin.ferello@kbz.com

Thank you, Justin Ferello Technical Support Specialist KBZ, a Cisco Authorized Distributor http://www.kbz.com e/v: justin.ferello@kbz.com
Cisco Employee

Jabber thru Firewall to IM&P

It *might* work, but it has not been tested, and thus it's not supported by Cisco.

That's why we have currently AnyConnect for that.

Read response 16, Q1

https://communities.cisco.com/message/102565#102565

The answer to this?? CE

There's more to it than what you currently have, what you're missing, you'll get on 10.X

See this design presentation:

https://communities.cisco.com/docs/DOC-35216

You cannot share the above with the customer, but will give you enough info to provide them with an answer and what to expect for CE.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
352
Views
0
Helpful
5
Replies