Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Jabber windows client make calls, prefix leading 0

We have a CUPS server 8.6 and are running Jabber for windows 9.2

we can't make outgoing calls from the Jabber client contacts, as the leading 0 is missing from the contacts phone number.

How do I add the prefix? I am thinking to create translation patterns in the callmanger.

Can I achieve it via the jabber-config.xml?

2 REPLIES
Cisco Employee

Jabber windows client make calls, prefix leading 0

Hi,

You can use application Dial rules on CUCM for this task.

Documentation is here:

http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/8.6/JABI_BK_J29330BB_00_jabber-for-iphone-admin-guide_chapter_01.html#CJAB_RF_AFABD78E_00

You can also use translation patterns for this as well. The Jabber phone can dial anything that an IP phone can dial as long as you have that pattern in the correct partition for the clients to reach. Some customer's don't like this due to adding additional patterns for other phones that could confict with this however as long as you create separate CSS/partitions then everything will work as desired.

Thanks,

Brad

Jabber windows client make calls, prefix leading 0

Just stick with Translation patterns.


=============================
Please remember to rate useful posts, by clicking on the stars below.

=============================

Please remember to rate useful posts, by clicking on the stars below.

966
Views
0
Helpful
2
Replies