We are rolling out Jabber for Windows and trying to integrate WebEx Meeting Centre with the Jabber client. This is an on prem deployment using CUPS and CUCM.
Adding the tab on the client via the XML config file is fairly straight forward, however the infomation on the icon is a bit hazy, so first question is do We have a template icon for the client rather than us trying to create one, and secondly much of the docs refering to configuring API's for WebEx integration was written 5 years ago, do we have any new document.
Rate all helpful post by clicking stars below the answer.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...