For ad-hoc video conferencing you would need an MCU, TelePresence Server, or PVDM3 modules configured for video (least recommended option) registered to CUCM.
The Jabber iOS/Android clients support VoIP but not video yet. Also, they presently require a VPN connection such as AnyConnect to work outside the firewall. QoS is also a major consideration for the mobile clients; most of the call path is best effort and call quality cannot be guaranteed.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...