I'm moving away from CIPC in favor of Jabber phone mode.
Now that hunt group login/logout and call pickup works, all I'm missing is a form of speed dial.
Ideally I'd like to add pizza guys with phone numbers as speed dial. I know that there's no presence server involved, but if you can add custom tabs locally surely you should be able to add contacts as well.
The problem is that the contacts for Corporate contacts are stored in the roster table, and for pizza guy contacts are in the nonpresencecontacts table, BUT, those are stored in the IM&P server, not on CUCM.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...