Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Using MOVI over a 4G connection

I am trying to connect with MOVI over Verizon's 4G network. I can connect the call, however video on both ends is a black screen. Has anybody had issues with this type of connection?

3 REPLIES

Re: Using MOVI over a 4G connection

Movi works succesfully over a 3G connection. I think must work over a 4G also.

br. Oleksandr

br Oleksandr
New Member

Using MOVI over a 4G connection

Install wireshark on your laptop and have a look at the packet capture.

Do you see any errors?

Check the logs on both sides, do you see anything out of the ordinary there?

I've personally used Movi/Jabber Video over a VzW 4G connection with no issues.

Using MOVI over a 4G connection

Hello!

Could you check the IP Address which you get from your 4G-ISP on your device?

I assume you connect to the VCS-E, anyhow on such questions please describe the used environment.

The VCS-E might get "confused" if you get a public ip address which is firewalled, as

the VCS expects you can send and receive media without blocking.

Either use a VPN tunnel giving you a private ip / nat or ask your ISP if you could get a

private ip with NAT.

In some rare cases ipv6 could also be the impacting factor.

If it is the FW detection issue:

You could escalate this to (your) Cisco (Partner) to file a feature request for better FW handling

like fully implement STUN with a secondary IP, options to force traversal for specific clients

(like setting on the vcs, provisioning prameter via tms, ...)

Please remember to rate helpful responses and identify

611
Views
0
Helpful
3
Replies