Webex Meeting Center with Jabber automatic call-in?
We are using Webex Meeting Center with Jabber.
The PC can control my phone and Webex can be started with some clicks.
Currently I have always to enter my Access code (guest access code) and an attendee ID.
Is there any method / hint to have an automatic call-in (without entering all that numbers again in each meeting)?
Meaning: Webex tells me also in a pop up, what I have to enter. Why is this not possible by clicking a button to have this Access code (guest access code) and attendee ID taken over / sent over to the assigned (my) telephone automatically,,,
E.g. in former times it was working: Webexnumber +",<personal ID>" and I was directly in the meeting (saved that into Jabber as a contact. But after the latest update this is not working anymore.... I just come into a room, which is a total different room (maybe my own) than that one I was invited into... !?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...