Am running Jabber Video (v4.4 14479) on a Macbook Pro (5,3 : Mid-2009) with OSX 10.7.3. It installs fine but cannot find my iSight cameras or a Precision HD when connected. Jabber reports 'Make sure a camera is properly connected to your computer'. Nothing else seems to be using the camera ...
Of course, as soon as I post the question, I find the solution. A utility called iGlasses that allows you to modify iSight's saturation and brightness wasn't playing nice. Remove iGlasses and Jabber finds my iSight.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...