Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

[Question] Jabber Video authentications.

For the first, English is not my mother language, so my type may have some incorrect words.

Hi. I'm using jabber video with VCS-C(7.2.1) / VCS-E(7.2.1) / TMSPE(14.4) / AD(2008server)

My issue is so simple but, I can not check this with my own knowledge,

So, I ask you a favor to solve here.

VCS-C is provisioned with TMSPE which is connected with AD.

VCS-C is not directly connected with AD, AD only connected with AD.

By the documents, this design is little different from it with AD's position.

In the documents of the Cisco_VCS_Authenticating_Devices_Deployment_Guide_X7, AD also directly connected with VCS-C or VCS-C\E both.

But I saw the local-database credentials on the VCS-C, and there are AD's informations that are reached on the VCS-C.

Then, here the problem.

When I set on VCS-C's Default Zone and Default sub-zones with Check Credentials policy. I cannot login.

When I set on VCS-C's Default Zone and Default sub-zones with Treat as authenticated policy, I can login.

Should I make the VCS-C interwork with AD directly not through the TMSPE?

Plz see the reference pirctures of attached file to understatnd this structure.

Thank you.

  • Jabber Video Support
506
Views
0
Helpful
0
Replies