Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

100 base fx sfp

Hi,

I have issue with setting speed and duplex on a 100 base fx sfp, on a 2960 running c2960-lanbasek9mz.122-25.FX.bin.

problem is, its autonegotiating with a 2912 at half duplex.

Thanks.

1 REPLY

Re: 100 base fx sfp

The basic setting for a 100mbs interface to set itself to with no negotiation is 100/half.

Both sides need to be set for auto for 100/full to be negotiated. Or you have to set both sides to 100/full statically.

HTH>

297
Views
5
Helpful
1
Replies
CreatePlease to create content