ā02-08-2012 11:05 AM - edited ā03-07-2019 04:49 AM
Hey there,
I just purchased and received two Cat 3k-x 10G- T network modules. When I plug them into the switch, the logs show:
004613: Feb 8 10:44:18.037: %PLATFORM-4-FRULINK_UNSUPPORTED: Unsupported FRULink 10G NS module inserted in Switch 1. Remove the unsupported module and insert a supported FRULink module.
004614: 000183: Feb 8 10:44:21.199: %PLATFORM-4-FRULINK_UNSUPPORTED: Unsupported FRULink 10G NS module inserted in Switch 2. Remove the unsupported module and insert a supported FRULink module.
004613: Feb 8 10:44:18.037: %PLATFORM-4-FRULINK_UNSUPPORTED: Unsupported FRULink 10G NS module inserted in Switch 1. Remove the unsupported module and insert a supported FRULink module.
004614: 000183: Feb 8 10:44:21.199: %PLATFORM-4-FRULINK_UNSUPPORTED: Unsupported FRULink 10G NS module inserted in Switch 2. Remove the unsupported module and insert a supported FRULink module.
I'm using two 3750E switches with flash:/c3750e-universalk9-mz.122-58.SE2/c3750e-universalk9-mz.122-58.SE2.bin"
Any help?
ā02-08-2012 11:23 AM
Maybe I need to upgrade the ios to 15.0...even though I don't see anything about 10G modules in the release notes.
ā02-08-2012 12:50 PM
Russel,
please take a look at
for module C3KX-NM-10GT Supported by Minimum Cisco IOS Release is 15.0(1)SE
Peppe
ā02-08-2012 01:23 PM
Thank you!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: