Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

12.2(33)SXH1 TestErrorCounterMonitor - - - - - Failure

Has anyone experience this since upgrading SXH code? This is not a bug. In 12.2(33)SXH onwards, cisco added 'LinkErrorMonitoring' feature, where Diagnostics proactively checks for various ASIC/port related errors periodically, and would print a syslog when these error Counters exceed threshold.

I am wondering if anyone has a recommendation to resolve this. It looks like a linecard hardware issue to me.

Jul 11 12:47:43: %CONST_DIAG-SP-4-ERROR_COUNTER_WARNING: Module 9 Error counter exceeds threshold, system operation continue.

Jul 11 12:47:43: %CONST_DIAG-SP-4-ERROR_COUNTER_DATA: ID:26 IN:0 PO:255 RE:199 RM:255 DV:39 EG:2 CF:10 TF:41109

Jul 11 12:47:43: %CONST_DIAG-SP-4-ERROR_COUNTER_WARNING: Module 9 Error counter exceeds threshold, system operation continue.

Jul 11 12:47:43: %CONST_DIAG-SP-4-ERROR_COUNTER_DATA: ID:26 IN:1 PO:255 RE:199 RM:255 DV:39 EG:2 CF:10 TF:41098

1 REPLY
Silver

Re: 12.2(33)SXH1 TestErrorCounterMonitor - - - - - Failure

To avoid these trace backs, This counter should not be monitored by Online Diagnostic. For the further details for this issue follow the bug id CSCsm48564 .

1328
Views
0
Helpful
1
Replies
CreatePlease to create content