Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

1721 and t1

Hi,

I've a 1721 cisco router and I need to purchase to my ISP (Telefonica Spain) a point to point conection to internet.

What kind of wic have I need to purchase?

best regards

1 ACCEPTED SOLUTION

Accepted Solutions

Re: 1721 and t1

Hi Edgar

since its a point to point (T1) link its limited only to 1.5 Mbps you can make use of that 1.5 Mbps bandwidth alone.

you wont be able to add or remove any channels on this module.

if you want to upgrade the existing bandwidth from 1.5 Mbps then you will have to add up one more module or go with WIC-2T and 2*T1's which can support 2*1.5Mbps ..

regds

7 REPLIES

Re: 1721 and t1

Hi Edgar

you can go ahead with WIC-1T card for this connectivity.

http://www.cisco.com/en/US/products/hw/routers/ps214/products_tech_note09186a00801f5d87.shtml

regds

Community Member

Re: 1721 and t1

Hi,

Hw many channels are reserved for a 1t connection? if I add more channels, will this card be enough?

best regards

Re: 1721 and t1

Hi Edgar,

WIC-1T supports maximum of 2Mbps bandwidth.

Re: 1721 and t1

Hi Edgar

since its a point to point (T1) link its limited only to 1.5 Mbps you can make use of that 1.5 Mbps bandwidth alone.

you wont be able to add or remove any channels on this module.

if you want to upgrade the existing bandwidth from 1.5 Mbps then you will have to add up one more module or go with WIC-2T and 2*T1's which can support 2*1.5Mbps ..

regds

Community Member

Re: 1721 and t1

Hi,

This wic card is available for 1721?

Re: 1721 and t1

Hi Edgar

do check the link posted in my first post..

regds

Community Member

Re: 1721 and t1

Examples for this wic with 1721?

129
Views
0
Helpful
7
Replies
CreatePlease to create content