1841 ISR FE0/0 %LINK-3-UPDOWN: changed state to up
Hi I have an 1841 ISR that is constantly reporting the following alamr string in the logs
%LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
There are no connection issue to indicate a problem and I cant see an loss of connectivity/traffic. The log is full of these link alarms and there are no other errors reported. Is it possibel this is caused by something like excessive broadcasts on the segment? Or has anyone ever seen these symptoms before? Any info is greatly appreciated. Thanks
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...