Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1941W Replacement

I know that the 1941W has gone EOL and the replacement is a standard 1941 with an external AP. Does the AP need to be autonomous?

Thanks

3 REPLIES
VIP Purple

1941W Replacement

HI Amar,

The Cisco 1941 supports dual radios - 802.11 b/g/n and 802.11a/n and is capable of operating in both autonomous and unified modes.


http://www.cisco.com/en/US/prod/collateral/routers/ps10538/data_sheet_c78_556319.html

Regards
Don't forget to rate helpful posts.

New Member

1941W Replacement

Hi Sandeep,

That's what I got from the data sheet also. There needs to be a controller of some sort if we are to use it in unified mode?

Thanks,

Amar

VIP Purple

1941W Replacement

Hi Amar,

Yes, you need a controller in Unified Mode.

I think these are called as Embeded AP.

http://www.cisco.com/en/US/docs/wireless/controller/7.4/configuration/guides/lwap/config_lwap_chapter_0110.html

Also check this Thread:

https://supportforums.cisco.com/message/3737097

Regads

Dont forget to rate helpful posts.

165
Views
0
Helpful
3
Replies