Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1p3q8t and 1p7q8t default QoS configs IOS and CATOS

Hi there,

Guys, I dont have the hardware to hard, but does anyone have the default config for these two port queueing types?

Also, in CatOS, you can do a wr term all and get the defaults, can you do this in IOS?

Many thx

Ken

2 REPLIES

Re: 1p3q8t and 1p7q8t default QoS configs IOS and CATOS

Hi,

The defaults are all in the config guide, here:

http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a00801679f8.html

In IOS you can't get the defaults with a show command, unfortunately you need to look them up..

HTH

Andrew.

New Member

Re: 1p3q8t and 1p7q8t default QoS configs IOS and CATOS

thats a bit of a pain :(

just wondering if anyone had a catOS switch and could do a write term all to get the defaults, but if no joy, I will work though the doc and work them out.

I am just comparing what Cisco best practises are ie,

set qos txq-ratio 1p7q8t 5 25 10 10 10 5 5 30

set qos wrr 1p7q8t 5 25 20 20 20 5 5

set qos wred 1p7q8t tx queue 1 80:100 100:100 100:100 100:100 100:100 100:100 100:100 100:100

set qos wred 1p7q8t tx queue 2 80:100 100:100 100:100 100:100 100:100 100:100 100:100 100:100

set qos wred 1p7q8t tx queue 3 80:100 100:100 100:100 100:100 100:100 100:100 100:100 100:100

set qos wred 1p7q8t tx queue 4 80:100 100:100 100:100 100:100 100:100 100:100 100:100 100:100

set qos wred 1p7q8t tx queue 5 80:100 100:100 100:100 100:100 100:100 100:100 100:100 100:100

set qos wred 1p7q8t tx queue 6 80:100 100:100 100:100 100:100 100:100 100:100 100:100 100:100

set qos wred 1p7q8t tx queue 7 80:100 100:100 100:100 100:100 100:100 100:100 100:100 100:100

set qos map 1p7q8t tx 1 1 cos 1

set qos map 1p7q8t tx 2 1 cos 0

set qos map 1p7q8t tx 3 1 cos 4

set qos map 1p7q8t tx 4 1 cos 2

set qos map 1p7q8t tx 5 1 cos 3

set qos map 1p7q8t tx 6 1 cos 6

set qos map 1p7q8t tx 7 1 cos 7

set qos map 1p7q8t tx 8 cos 5

set qos map 1p7q8t tx 6 1 cos 6

set qos map 1p7q8t tx 7 1 cos 7

set qos map 1p7q8t tx 8 cos 5

and what the actual defaults are

Many thx indeed fella,

Ken

691
Views
4
Helpful
2
Replies