Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

2 ISP with Inboud Mail Server

Hello,

I've got an 1841 connected to 2 ISP, each ISP assigned me a /29. I want to use both connections for inbound SMTP connections to a mail server 10.0.0.1.

Currently connections via ISP1 are working and are showing up correctly under show ip nat translations. But connections made to ISP2 doesn't seems to work unless I'm connection via a different IP in the /29 of ISP2.

I presume that traffic is being routed via the default route (ISP1) and not via the originating interface ISP2.

What configurations options must I enable to allow connections made via ISP2 is routed back via ISP2?

Regards,

Johan

3 REPLIES
Silver

Re: 2 ISP with Inboud Mail Server

You can NAT the incoming source address on ISP2 link to a single address and add route to that address to ISP2 interface.

Thanks.

Community Member

Re: 2 ISP with Inboud Mail Server

Hi Rais

I've already added Natted the incomming source on both links:

ip nat inside source static tcp 10.0.0.10 25 64.30.xxx.xxx 25 extendable

ip nat inside source static tcp 10.0.0.10 25 64.36.xxx.xxx 25 extendable

But the problems seems to be that the outgoing traffic is routed via ISP1.

Silver

Re: 2 ISP with Inboud Mail Server

Here you are NATing the inside client. You need to source-nat the incoming traffic from the Internet [ISP2 only] to your mail server.

Thanks.

133
Views
0
Helpful
3
Replies
CreatePlease to create content