Couple of things to check. First, try re-seating the DRAM and flash modules.
Secondly, I presume you have tested your console terminal on another router. That is, I presume you terminal is working correctly.
Also, if your terminal is a laptop, try using a desktop PC instead. The voltages used by laptops on the serial port are sometimes not enough for reliable communication. The 2500 series seems to be particularly sensitive to incorrected levels on the serial line.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...