Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

2600 Flash SIMM Upgrade Problem

Hi NetPros. I added 8MB flash - SM732C2000AS-12 but after switching on the router and checking the memory status it is not reflecting the additional memory, it is still showing 16MB of flash instead of 24MB. I have 6 8MB flash and i checked all of them but no luck. Please help.

4 REPLIES
Silver

Re: 2600 Flash SIMM Upgrade Problem

Is it a 2600 or a 2600xm?

The 2600 series max flash is 16 mb

New Member

Re: 2600 Flash SIMM Upgrade Problem

the model is 2621XM.

Silver

Re: 2600 Flash SIMM Upgrade Problem

I think the Flash you have is for the 2600 series. The 2600XM series accepts only 16mb or 32mb 3.3 volt flash. the 2600's is 5 volt.

Cisco Employee

Re: 2600 Flash SIMM Upgrade Problem

Please have a look at the link below.Go through it and it should help you find out the exact problem you are facing:

http://www.cisco.com/en/US/products/hw/routers/ps259/products_installation_guide_chapter09186a008007e1fb.html#wp93135

HTH,

-amit singh

177
Views
3
Helpful
4
Replies
CreatePlease to create content