Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2600 router

I have a 2600 router and im trying to set it up for SDM. The crypto command is not there. What do i do? HELP!!!

show version

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(15b), RELEASE SOFTWARE (fc1                                   )

Copyright (c) 1986-2005 by cisco Systems, Inc.

Compiled Thu 25-Aug-05 13:38 by ssearch

Image text-base: 0x80008098, data-base: 0x81A255C4

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Testrouter uptime is 3 hours, 10 minutes

System returned to ROM by reload

System restarted at 10:39:39 UTC Mon Jul 9 2012

System image file is "flash:c2600-j1s3-mz.123-15b.bin"

cisco 2621 (MPC860) processor (revision 0x102) with 61440K/4096K bytes of memory                                   .

Processor board ID JAB041306F1 (1510524708)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

TN3270 Emulation software.

2 FastEthernet/IEEE 802.3 interface(s)

2 Serial network interface(s)

Everyone's tags (2)
New Member

2600 router

Do i update the IOS to a version that has the crypto command on there, or is there another way to configure SSH in the router?

VIP Purple

2600 router

Your image is "Enterprise Basic" (j1s3), that doesn't include any crypto. For crypto you need a k8 or k9-image.

Don't stop after you've improved your network! Improve the world by lending money to the working poor:
New Member

2600 router

thanks for the info.