cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
817
Views
0
Helpful
2
Replies

2620xm System Configuration........

SCORPION69
Level 1
Level 1

Ok...this will make you all laugh.....however I am way over on this one......

I have set-up the router with a simple configuration and then "copy startup-config running-config...

Reboot the router and it ALWAYS goes back to the System Configuration Dialog....

It is like it never sees the running-config...I have checked the startup-config and the running-config and I find nothing that would be causing this....

Also there is NO tftpserver running for the router to grab the files from the lan...

Please......what am i missing???

1 Accepted Solution

Accepted Solutions

glen.grant
VIP Alumni
VIP Alumni

Your config register is incorrect , change it to 0X2102 and reboot .

View solution in original post

2 Replies 2

glen.grant
VIP Alumni
VIP Alumni

Your config register is incorrect , change it to 0X2102 and reboot .

Thanks.........I found Document ID: 6201- Why Does My Router Lose Its Configuration During Reboot?

But thanks for the reply...that was the problem....

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: