Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2620xm System Configuration........

Ok...this will make you all laugh.....however I am way over on this one......

I have set-up the router with a simple configuration and then "copy startup-config running-config...

Reboot the router and it ALWAYS goes back to the System Configuration Dialog....

It is like it never sees the running-config...I have checked the startup-config and the running-config and I find nothing that would be causing this....

Also there is NO tftpserver running for the router to grab the files from the lan...

Please......what am i missing???

1 ACCEPTED SOLUTION

Accepted Solutions
Purple

Re: 2620xm System Configuration........

Your config register is incorrect , change it to 0X2102 and reboot .

2 REPLIES
Purple

Re: 2620xm System Configuration........

Your config register is incorrect , change it to 0X2102 and reboot .

New Member

Re: 2620xm System Configuration........

Thanks.........I found Document ID: 6201- Why Does My Router Lose Its Configuration During Reboot?

But thanks for the reply...that was the problem....

574
Views
0
Helpful
2
Replies