11-25-2008 03:43 PM - edited 03-06-2019 02:40 AM
I have a 2801 running the very latest 12.4(22)T (can't remember what feature set) that is connected directly on a 10/100 Ethernet interface to an ASA5510 (running 7.2(4) - its actually FastEthernet0/0 connected to Ethernet0/2. They are currently configured for auto-speed & duplex and show they have negotiated 100/Full at both ends(I have tried hard-coding 100/Full at both ends and the behaviour is exactly the same).
On the 2801 every 30-seconds there is a message logged that says the FastEthernet0/0 interface changed state to up:
003868: Nov 25 23:26:07.929 GMT: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
003869: Nov 25 23:26:37.926 GMT: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
There appear to be no errors on the interface and it seems to be operating OK, however this message is a slightly worrying. The ASA is not reporting any equivalent errors.
Does anyone know why this is and how to resolve it? The 2801 when connected to a Catalyst 3560 using the same interface didn't generate the messages.
Andy
11-27-2008 02:22 PM
I thought with the 30-second interval it might be a CDP issue, however I have disabled CDP on the 2801 and the behaviour remains the same.
Anyone any ideas what this could be? Previously the 2801 was connected to the ASA via a Catalyst 3560 and there were no errors logged. Unfortunately due to the security requirements the 2801 must be connected directly to the ASA.
Andy
09-20-2011 08:11 AM
hey andrew, have you ever resolved this issue?
I am having a very similar issue, if not the same.
Have router directly connected to ASA and i get these in my router logs, but no errors on ASA, we are having Internet cconnectivity issues though and the costumer seems to resolve them by rebooting the ASA....?
*Sep 18 00:53:47.922: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Sep 18 00:53:52.922: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Sep 18 00:54:28.922: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Sep 18 00:54:31.922: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Sep 18 04:52:20.921: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Sep 18 04:52:25.921: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Sep 18 04:53:01.921: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Sep 18 04:53:04.921: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Sep 18 05:32:29.921: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Sep 18 05:32:33.921: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Sep 18 05:33:09.921: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Sep 18 05:33:15.921: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Sep 18 12:07:00.919: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Sep 18 12:07:04.919: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Sep 18 12:07:40.919: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Sep 18 12:07:45.919: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Sep 18 12:12:24.919: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Sep 18 12:12:29.919: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Sep 18 12:13:05.919: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Sep 18 12:13:08.919: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Sep 18 16:47:53.918: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Sep 18 16:47:58.918: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Sep 18 16:48:34.918: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Sep 18 16:48:38.918: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Sep 18 21:25:49.917: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Sep 18 21:25:54.917: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Sep 18 21:26:30.925: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*Sep 18 21:26:33.917: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
Internet address is #.#.#.#/29
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, media type is RJ45
output flow-control is unsupported, input flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:26:36, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 63
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
1988155 packets input, 321118320 bytes, 0 no buffer
Received 51 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
2584672 packets output, 2176797063 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
128 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
Thankx!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: