Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

2811 router and CF flash

Can the CF flash be removed and larger one put in while the router is running??

3 REPLIES

Re: 2811 router and CF flash

Yes you can.

Just make sure the larger one is not above the max support size. You can find info in data sheet on cco.

Hall of Fame Super Bronze

Re: 2811 router and CF flash

Yes, the CF is only accessed while loading the code from memory or writing a core-dump.

Caveat:

The flash in the 28xx ISR router may also hold Vlan information if you have a switch module installed.

HTH,

__

Edison.

Hall of Fame Super Gold

Re: 2811 router and CF flash

The maximum size is 2Gb CF. Due to the current fad, you should can get 2Gb CF at bargain basement price.

Just make sure that before you start using the CF, FORMAT the CF using the router.

NOTE: The same rules apply for USB as well, however, if you plan to use the USB-boot feature, you need to upgrade the ROMmon.

Hope this helps.

1053
Views
0
Helpful
3
Replies
CreatePlease to create content