Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2811 Router Config

I want to change values of DNS & WINS to new IP 10.1.0.6 but I do not know how to do so.

Current value of running config is:

rypto isakmp client configuration group XYZVpnGroup

key backVPNk3y

dns 10.1.0.12

wins 10.1.0.12

domain xyz.com

pool VPNPool

acl Split

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: 2811 Router Config

Hi

As both Narayan and myself have in the configs

dns 10.1.0.6

wins 10.1.0.6

Jon

7 REPLIES

Re: 2811 Router Config

Remove the crypto map which is assigned to the interface.

no crypto map

Then use the no form of the comand under the clinet group configuration. I think it should do the trick

crypto isakmp client configuration group XYZVpnGroup

no dns 10.1.0.12

no wins 10.1.0.12

dns x.x.x.x

wins y.y.y.y

Narayan

Hall of Fame Super Blue

Re: 2811 Router Config

Hi

From conf t mode on your router

2811_rtr(conf t)# crypto isakmp client configuration group XYZVpnGroup

and then type

no dns 10.1.0.12

no wins 10.1.0.12

dns 10.1.0.6

wins 10.1.0.6

HTH

Jon

New Member

Re: 2811 Router Config

Ok.

How do I add the new values of DNS 10.1.0.6 and WINS 10.1.0.6?

Re: 2811 Router Config

As said earlier, remove the old dns entry using the no form of the command and add a new entry using

dns

wins

HTH

Narayan

Hall of Fame Super Blue

Re: 2811 Router Config

Sorry Narayan, our postings keep getting crossed :-)

Hall of Fame Super Blue

Re: 2811 Router Config

Seems only fair that we both get rating for this

Jon

Hall of Fame Super Blue

Re: 2811 Router Config

Hi

As both Narayan and myself have in the configs

dns 10.1.0.6

wins 10.1.0.6

Jon

144
Views
5
Helpful
7
Replies
CreatePlease to create content