Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2811 Router loses connection to Motorola Cable Modem

Hi All,

Need a little Help !

I have a Cisco 2811 fa0/1 configured for DHCP connected to a Motorola Surfboard cable Modem (SB4100).

The FA0/1 is constantly dropping during the day, the longest period the connection stays up for is around 50 minutes.

I work from home during the Day and constantly access my companies intranet, using an SSLVPN. I also use Webex sessions during the day.

However the Irony is the connection is ok in the evening, when I have no need to access SSLVPN or Webex.

I thought i may have a faulty port, therefore I have already swapped ports but this makes no difference.

Also I'm constantly receiving the following error: %SCHED-3-STUCKMTMR: Sleep with expired managed timer 44F2CD70, time 0x11CE4BE8 (00:00:00 ago). -Process= "L2MM", ipl= 4, pid= 105 -Traceback= 0x4101CA0C 0x41E13C48 0x41E1407C 0x404C632C.

Your help is appreciated

Config file attached

Regards

Charles

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: 2811 Router loses connection to Motorola Cable Modem

Does the link fa0/1 actually flap or do you lose connection through it?

-Matt

6 REPLIES
Cisco Employee

Re: 2811 Router loses connection to Motorola Cable Modem

Hello Charles,

Does the router reboot or does the interface just go down?   I see you are running 12.4(13b) code so I did find a bug, CSCsc62064, for the traceback message along with reduced performance.  It is fixed in 12.4(15)T6, so I suspect a software upgrade might resolve this for you.

-Matt

Message was edited by: Matthew Blanshard

New Member

Re: 2811 Router loses connection to Motorola Cable Modem

Thanks Matthew,

I shall give the IOS a try.

Regards

Charles

New Member

Re: 2811 Router loses connection to Motorola Cable Modem

Hi Matthew,

I didn't answer your question ! The Router doesn't reboot, The CPU process is < 40% at it's peak, but is running around 10% constant.

The Cable modem appears to be operating.

Regards

Charles

Cisco Employee

Re: 2811 Router loses connection to Motorola Cable Modem

Does the link fa0/1 actually flap or do you lose connection through it?

-Matt

New Member

Re: 2811 Router loses connection to Motorola Cable Modem

Matthew,

Thanks for your help.

I've upgraded the flash to c2800nm-ipvoicek9-mz.124-25c.bin. and the issue has been resolved.

Thanks again.

Cisco Employee

Re: 2811 Router loses connection to Motorola Cable Modem

Outstanding! Glad to help out.

-Matt

667
Views
0
Helpful
6
Replies
CreatePlease to create content