I am facing problem with cisco catlayst 2960 switch
cisco catalyst with ios ver 12.12(52) SE is configured 3 vlans (1,200,100) .Siwtch port gigabit Ethernet 0/24 is configured as trunk connecting the cisco 2821 (ios ver 12.4(15) T3 ) gigathernet 0/0 port of the router.
vlan 1(management vlan)-192.168.10.0/24
vlan 200(Data)- 192.168.1.0/24
vlan 100(voice)- 192.168.11.0/24
vlan 200 is configured as native on both switches
when i am configuring any switch port connecting to PC under any of the vlan mentioned above ,I am able to ping router from pc but from router i am not able to ping pc
what can be the reasons for switch behaving like this
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...