Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

2851 used for Access Server?

Hello everyone. I managed to snag a great deal on a 2851 a few months back. Now I'm getting ready to setup my lab, and (thanks to Bryant and a couple of other sources) I've learned about terminal access servers. Since I am using the 2851 as my home router, it would be convenient to be able to use my lab on the road, or even a late night at work deploying.

Are there any modules to plug into a 2851 that would allow 8-16 asynch ports, using octal cables?

Jesse J. Derks CCNA R&S --- All views are mine, and do not necessarily represent those of my employer.
Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

2851 used for Access Server?

On the 2800 series, you can use an 8 or 16 port card.

See table-5 in this link:

http://www.cisco.com/en/US/prod/collateral/modules/ps5949/ps6182/product_data_sheet0900aecd80274416.html

HTH

1 REPLY
VIP Super Bronze

2851 used for Access Server?

On the 2800 series, you can use an 8 or 16 port card.

See table-5 in this link:

http://www.cisco.com/en/US/prod/collateral/modules/ps5949/ps6182/product_data_sheet0900aecd80274416.html

HTH

234
Views
0
Helpful
1
Replies
CreatePlease to create content