Router: 2911 SIP Gateway (C2900-UNIVERSALK9-M) IOS Ver: Version 15.2(4)M3
When I run the "show ntp status" command it is showing the correct date/time in with the NTP data. But when I run "show logg" the SIP messages being logged are showing a time that is 4 hours ahead of the actual time.
*Current Time I'm writing this is 11:45'ish...
# show ntp status Clock is synchronized, stratum 5, reference is 192.168.xx.x nominal freq is 250.0000 Hz, actual freq is 249.9996 Hz, precision is 2**21 ntp uptime is 836292100 (1/100 of seconds), resolution is 4016 reference time is D74AE0C1.A5C9079D (11:44:01.647 EDT Tue Jun 17 2014) clock offset is 1.4716 msec, root delay is 156.27 msec root dispersion is 252.26 msec, peer dispersion is 17.29 msec loopfilter state is 'CTRL' (Normal Controlled Loop), drift is 0.000001556 s/s system poll interval is 512, last update was 427 sec ago.
#show logg 1268129: Jun 17 15:53:41.146: //543358/47CDDA800000/SIP/Msg/ccsipDisplayMsg:
As you can see the date and time of this last log message in the buffer is showing a time of "15:53:41". Which is about 4 hours ahead of the current time, which makes me think it's a timezone thing, but it looks correct in NTP status... Any idea why the correct time and time zone <(*I'm in EST zone) is in NTP status, but incorrect in the log(s)?
Any ideas how I can fix this? Any thoughts or suggestions would be much appreciated.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.