Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

2911 Terminal/Comm Server config help

We have just purchased a 2911 terminal Server, with  2 16 ports HWIC-16A cards. I have been looking for some example configs and how to configure this for connecting to console ports. I am not having any luck finding anything. Does anyone have a sample config??

Below are the interface types that we have. Do i just add an IP to these interfaces?

interface Async0/0/0

no ip address

encapsulation slip

!

interface Async0/1/0

no ip address

encapsulation slip

!

interface Async0/0/1

no ip address

encapsulation slip

!

interface Async0/1/1

no ip address

encapsulation slip

!

interface Async0/0/2

no ip address

encapsulation slip

!

interface Async0/1/2

no ip address

encapsulation slip

Thanks,

Alan

Everyone's tags (1)
4 REPLIES
VIP Super Bronze

Re: 2911 Terminal/Comm Server config help

What is the part number for the module you have

here are the part numbers for 8, 16 and 32 port cards

HWIC-8A/S and HWIC-16A/SM-32A

http://www.cisco.com/en/US/prod/collateral/modules/ps5949/ps6182/prod_qas0900aecd80274424.html

http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a008014f8e7.shtml

HTH

Community Member

Re: 2911 Terminal/Comm Server config help

I have the HWIC-16A modules.

The link you provided is for configuring a 2511, I have a 2911, with the interfaces shown above. I can't find any examples on how these would be configured.

Thanks,

Alan

Community Member

2911 Terminal/Comm Server config help

You can follow this link. I just setup our OOB with same components as you have.

http://routing-bits.com/2008/09/30/cisco-terminal-server-with-menu-command/

Community Member

2911 Terminal/Comm Server config help

If you want to use the line for console connectivity then, leave the default config generated for the interface Asyncx/x/x and configure you line x/x/x

example:- If you want port of the HWIC-16A to console into some cisco device, then the config should look like this..

!

interface Async0/0/0

no ip address

encapsulation slip

!

line 0/0/0

login local

no exec 

transport input all

stopbits 1

!

The above config will let you console into device connected to Async0/0/0 (port 0). You can then use telnet

Hope this helped.

6355
Views
0
Helpful
4
Replies
CreatePlease to create content