Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

2940 IOS upgrade

I'm trying to upgrade the IOS of a 2940 and the Cisco Network Assistant program that I'm using keeps erroring out.  It says "Invalid/incompatible IOS image (Note: Only TAR image is supported."  I am installing a tar image that I have used before.  The image name is c2940-i6k2l2q4-tar.121-22.EA13.tar.  Thanks for your assistance.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: 2940 IOS upgrade

Never tried CNA before.  Have you tried using CLI?  Maybe the file is corrupt.  Have you tried testing for the MD5 Hash?

The command is:  archive download-sw tftp:///c2940-i6k2l2q4-tar.121-22.EA13.tar

Hope this helps.  Please don't forget to rate useful posts. 

2 REPLIES
Hall of Fame Super Gold

Re: 2940 IOS upgrade

Never tried CNA before.  Have you tried using CLI?  Maybe the file is corrupt.  Have you tried testing for the MD5 Hash?

The command is:  archive download-sw tftp:///c2940-i6k2l2q4-tar.121-22.EA13.tar

Hope this helps.  Please don't forget to rate useful posts. 

New Member

Re: 2940 IOS upgrade

I'm sorry to have wasted your time.  I stupidly thought I was working on a 2940 and it was a 2960-8TC.  That is where I ran into trouble.  Thanks for your help on this.

778
Views
0
Helpful
2
Replies
CreatePlease to create content