I have one port that I want to plug machines in. They can either be on vlan 1 or vlan 189. Is there any way to set up the "switchport access vlan #" command to make it so that both those vlans have access to it?
There are specific cases when you use 2 different vlans, 1 for voice & other for data. This is what you do when your port participates in both voice & data.You specifically mention which vlan is for voice & which is data. Done as follows:
switchport mode access
switchport access vlan 100
switch voice vlan 200
Other than such case, you cant have a single port as part of 2 vlans simultaneously.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.