10-05-2009 04:41 AM - edited 03-06-2019 07:59 AM
Hi People,
My 2950 switch's system bulb is blinking in green color whereas other bulbs in mode off. The ports which cables are connected in amber color.When I telnet into it the prompt gives like the following (switch:)and it says "bootin error".Wt could be the problem ?
Regards,
Nuwan
Solved! Go to Solution.
10-06-2009 07:18 AM
If its missing or corrupted follow this doc for recovery.
http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml
10-05-2009 04:57 AM
Sounds like the image is missing or corrupted.
10-06-2009 04:53 AM
Hi,
Thanx buddy. But the thing is its not allowed me to load the IOS.What can I do for this.Is there any crucial steps?
Regards,
Nuwan
10-06-2009 07:18 AM
If its missing or corrupted follow this doc for recovery.
http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml
10-07-2009 12:49 AM
Hey man,
Thanks amillion my friend. It is solved out.
Best regards
Nuwan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide