Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2960 Clustering Problem

We have 4 C2960-48PST-Ls and 1 C2960-24LT-L and would like to cluster them.  One of the C2960-48PST-L is the cluster master.  We have sucessfully clustered the 4 C2960-48PST-Ls but when we try to add the C2960-24LT-L (cluster member mac-address 0024.c3c0.a680

) we get the following error message: "%ERROR member unreachable".  When we run the command (on the cluster master) cluster member candidate, the C2960-24LT-L is displayed.  The C2960-48PST-Ls are running IOS 12.2(46)SE LANBASEK9-M and the C2960-24LT-L is running IOS 12.2(44)SE5 LANBASE-M.

1 REPLY
Hall of Fame Super Gold

Re: 2960 Clustering Problem

1.  Wrong VLAN;
2.  Wrong password; or
3.  The remote is probably configured as a cluster manager instead of a slave

893
Views
0
Helpful
1
Replies
CreatePlease login to create content