Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2960 VLAN Limitation

Hi,

I Have WS-C2960S-48TS-S with version 12.2(55)SE5 and image C2960S-UNIVERSALK9-M.

I'm having problems adding more the 64 vlans.

show vtp status shows:

Feature VLAN:

--------------

VTP Operating Mode                : Transparent

Maximum VLANs supported locally   : 64

Number of existing VLANs          : 64

Configuration Revision            : 0

MD5 digest                        : 0x7B 0xC2 0xDD 0x12 0xF4 0x5D 0x71 0x94

                                    0x9F 0x44 0x6A 0x4D 0xCC 0x2C 0x86 0x6E

Is it a image limitation or VTP problem ?

Thanks!

Everyone's tags (3)
3 REPLIES

Re: 2960 VLAN Limitation

Hi Daniel,

it's a license limitation for that platform, see:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/qa_c67-577519.html

The last letter in the product ID. If the last letter is "-L," it's LAN Base. If it's "-S," it's LAN Lite.

Q. Can a Cisco Catalyst 2960-S Series LAN Lite switch be upgraded to LAN Base?

A. No. The feature set is bound to the hardware model. To get the features and capabilities of LAN Base, you must purchase a LAN Base switch.

Hope that helps

Rolf

Purple

Re: 2960 VLAN Limitation

I have to ask why would you need more than 64 on a 2960 platform ,thats way more than you should need on a platform like that.

New Member

Re: 2960 VLAN Limitation

It's on my QA network, we have a lot of pepole testing on the network and each one has is own stack of vlans.

so we have about 200 vlans

528
Views
0
Helpful
3
Replies
CreatePlease to create content