Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2960 vrf support

Dear all

I am using WS C2960-24TT-L , and i want to deploy vrf lite on that, is it possible to do that ,

Thanks in advance

Subhasis

3 REPLIES
Cisco Employee

Re: 2960 vrf support

Hi Subhasis,

C2960 is a L2 only switch. VRF is L3 features, and it is not available to 2960.

HTH,

jerry

New Member

Re: 2960 vrf support

Thanks Jerry

If any alternative option is there to integrate 2960 switch with MPLS network, please let me know , we are creating sub interface on the router,and want to distribute multi vrf to the user.

Regards

Subhasis

Hall of Fame Super Bronze

Re: 2960 vrf support

Well, that's the only option if you just have a 2960 available.

Subinterface on a router with a vrf associated to that interface. This subinterface will belong to a specified Vlan with the 'encapsulation dot1q' and the users on the 2960 will use that router interface as their L3 gateway.

You will just create the L2 Vlans on the 2960 and you should have a VRF aware environment with the available hardware.

HTH,

__

Edison.

3281
Views
3
Helpful
3
Replies