Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

2960S-POE ERROR

Dear All,

We are getting the following alerts from 2960 Switch.

013142: Sep 25 03:57:04.388 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013143: Sep 25 03:57:05.002 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013144: Sep 25 03:57:07.015 MY: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/4: Power Controller reports power Imax error detected

013145: Sep 25 03:57:13.039 MY: %ILPOWER-7-DETECT: Interface Gi1/0/2: Power Device detected: IEEE PD

013146: Sep 25 03:57:13.417 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/2: Power granted

013147: Sep 25 03:57:16.410 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013148: Sep 25 03:57:17.050 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013149: Sep 25 03:57:19.063 MY: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/4: Power Controller reports power Imax error detected

013150: Sep 25 03:57:28.464 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013151: Sep 25 03:57:29.078 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013152: Sep 25 03:57:30.472 MY: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/4: Power Controller reports power Imax error detected

013153: Sep 25 03:57:33.864 MY: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/2, changed state to up

013154: Sep 25 03:57:34.866 MY: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/2, changed state to up

013155: Sep 25 03:57:40.497 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013156: Sep 25 03:57:41.110 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013157: Sep 25 03:57:43.113 MY: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/4: Power Controller reports power Imax error detected

013158: Sep 25 03:57:49.504 MY: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/2, changed state to down

013159: Sep 25 03:57:50.506 MY: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/2, changed state to down

013160: Sep 25 03:57:52.917 MY: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/2, changed state to up

013161: Sep 25 03:57:53.132 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013162: Sep 25 03:57:53.510 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013163: Sep 25 03:57:53.919 MY: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/2, changed state to up

013164: Sep 25 03:57:55.140 MY: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/4: Power Controller reports power Imax error detected

013165: Sep 25 03:58:04.552 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013166: Sep 25 03:58:05.165 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013167: Sep 25 03:58:06.560 MY: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/4: Power Controller reports power Imax error detected

013168: Sep 25 03:58:16.584 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013169: Sep 25 03:58:17.177 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013170: Sep 25 03:58:18.603 MY: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/4: Power Controller reports power Imax error detected

013171: Sep 25 03:58:28.617 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013172: Sep 25 03:58:29.204 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013173: Sep 25 03:58:30.630 MY: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/4: Power Controller reports power Imax error detected

013174: Sep 25 03:58:40.660 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013175: Sep 25 03:58:41.247 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013176: Sep 25 03:58:42.668 MY: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/4: Power Controller reports power Imax error detected

013177: Sep 25 03:58:52.693 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013178: Sep 25 03:58:53.280 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013179: Sep 25 03:58:54.701 MY: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/4: Power Controller reports power Imax error detected

013180: Sep 25 03:59:04.705 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013181: Sep 25 03:59:05.292 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013182: Sep 25 03:59:06.713 MY: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/4: Power Controller reports power Imax error detected

013183: Sep 25 03:59:06.954 MY: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/2, changed state to down

013184: Sep 25 03:59:07.961 MY: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/2, changed state to down

013185: Sep 25 03:59:16.732 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013186: Sep 25 03:59:17.319 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013187: Sep 25 03:59:18.740 MY: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/4: Power Controller reports power Imax error detected

013188: Sep 25 03:59:25.766 MY: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/2, changed state to up

013189: Sep 25 03:59:26.767 MY: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/2, changed state to up

013190: Sep 25 03:59:28.765 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013191: Sep 25 03:59:29.378 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013192: Sep 25 03:59:30.789 MY: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/4: Power Controller reports power Imax error detected

013193: Sep 25 03:59:40.792 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013194: Sep 25 03:59:41.385 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013195: Sep 25 03:59:42.805 MY: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/4: Power Controller reports power Imax error detected

013196: Sep 25 03:59:43.256 MY: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/2, changed state to down

013197: Sep 25 03:59:44.263 MY: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/2, changed state to down

013198: Sep 25 03:59:46.926 MY: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/2, changed state to up

013199: Sep 25 03:59:47.928 MY: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/2, changed state to up

013200: Sep 25 03:59:52.820 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013201: Sep 25 03:59:53.412 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013202: Sep 25 03:59:54.870 MY: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/4: Power Controller reports power Imax error detected

013203: Sep 25 04:00:04.847 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013204: Sep 25 04:00:05.440 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013205: Sep 25 04:00:06.871 MY: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/4: Power Controller reports power Imax error detected

013206: Sep 25 04:00:16.880 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013207: Sep 25 04:00:17.472 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013208: Sep 25 04:00:18.893 MY: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/4: Power Controller reports power Imax error detected

013209: Sep 25 04:00:28.902 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013210: Sep 25 04:00:29.494 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013211: Sep 25 04:00:30.915 MY: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/4: Power Controller reports power Imax error detected

013212: Sep 25 04:00:38.423 MY: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/46, changed state to up

013213: Sep 25 04:00:39.425 MY: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/46, changed state to up

013214: Sep 25 04:00:40.940 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013215: Sep 25 04:00:41.532 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013216: Sep 25 04:00:42.969 MY: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/4: Power Controller reports power Imax error detected

013217: Sep 25 04:00:52.983 MY: %ILPOWER-7-DETECT: Interface Gi1/0/4: Power Device detected: IEEE PD

013218: Sep 25 04:00:53.549 MY: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/4: Power granted

013219: Sep 25 04:00:53.948 MY: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/46, changed state to down

013220: Sep 25 04:00:54.949 MY: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/46, changed state to down

and the switch is running on the latest IOS (

Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 12.2(55)SE5, RELEASE SOFTWARE (fc1))

and the sh post command output also showing as PASS. We connected

    • Aruba Access Points model       AP105 on those mentioned ports.  kindly help on this issue.
  • LAN Switching and Routing
Everyone's tags (3)
3 REPLIES
New Member

2960S-POE ERROR

The same was faced at some other setup, try to shut and then no shut the port. Second, ensure that the power input to your switches is proper.

please rate the post if it helps.

New Member

2960S-POE ERROR

Dear Parvesh,

Thanks for your reply.

I did the same so many times but the result is same and the problem is  only with some interfaces

New Member

2960S-POE ERROR

can you please check if the power input is proper i.e. volts and amperes ?

second, try to confirm the devices plugged in and is it crossing some thresholds ?

381
Views
0
Helpful
3
Replies