Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Bronze

2960x master light doesn't agree with show switch output

I've been having issues with new 2960x's on the latest code. The output of show switch will show the switch I'm consoled into with the asterisk is the master but the front panel lights show a different switch is master. Is this a bug?

Everyone's tags (1)
2 REPLIES
VIP Super Bronze

Have you configured any

Have you configured any priority for the master switch? if not, try giving it a higher priority and test again

Bronze

Hi,The issue seems to be the

Hi,

The issue seems to be the switch that has the physical console connection is misreported or at least that's what I thought the asterisk in show switch output meant. It wasn't until I turned off every switch in the stack other than the one which hosted the console connection that I discovered this. 

I always like to renumber the switches so the top switch is one and is also the master, so did change numbers and priority but the confusion stemmed from not getting an accurate report as to the switch number I was consoled into.

Thanks.

 

37
Views
0
Helpful
2
Replies