Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3 IP adreses and Cisco ASA 5505

Hallo!

I am a realy newone @Cisco.

I own Cisco ASA 5505.

We have one UTP Ethernet cable (RJ45) witch handles three IP adreses. One adress is fot IP telephony, second one for computer network and third is reserved for our public WEBserver, but it is no active now and will not be active about one year.

What could be the best way to configure ASA?

Static NAT?

Everyone's tags (4)
3 REPLIES

Re: 3 IP adreses and Cisco ASA 5505

Hallo!

I am a realy newone @Cisco.

I own Cisco ASA 5505.

We have one UTP Ethernet cable (RJ45) witch handles three IP adreses. One adress is fot IP telephony, second one for computer network and third is reserved for our public WEBserver, but it is no active now and will not be active about one year.

What could be the best way to configure ASA?

Static NAT?

Hi,

Check out the below links on ASA 5505 for basic understanding of configuration and scenario based configuartion.Hope it helps out your query !!

http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/int5505.html

http://www.cisco.com/en/US/docs/security/asa/asa72/getting_started/asa5505/quick/guide/dmz.html

Ganesh.H

New Member

Re: 3 IP adreses and Cisco ASA 5505

Thx for your reply.

For now i have configured one of the IPs with static NAT like

#static (inside,outside) a.b.c.d a.b.c.d netmask 255.255.255.255

And i was using exactly thouse manuals + Cisco Cookbook (O'Raylie)

For now i am trying to make a correct Dinamic NAT from 2nd public IP.

Re: 3 IP adreses and Cisco ASA 5505

Thx for your reply.

For now i have configured one of the IPs with static NAT like

#static (inside,outside) a.b.c.d a.b.c.d netmask 255.255.255.255

And i was using exactly thouse manuals + Cisco Cookbook (O'Raylie)

For now i am trying to make a correct Dinamic NAT from 2nd public IP.

Hi,

Yes that command will static nat  on pix and check out the below link for beginers on pix natting configuration with different scenarios hope that claers out your query.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00800b6e1a.shtml#multi_global

If helpful do rate the valauble post

Ganesh.H

745
Views
0
Helpful
3
Replies